Articles

<Journal papers>

[1] T. Kishimoto, H. Hachisu, J. Fujiki, K. Nagato, M. Yasuda, H. Katori, gElectrodynamic Trapping of Spinless Neutral Atoms with an Atom Chiph, Phys. Rev. Lett. 96 (2006) 123001-1-4. [pdf]

[2] K. Nagato, T. Ooi, T. Kishimoto, H. Hachisu, H. Katori, M. Nakao, gDesign and Prototyping of Stark Atom Chip for Electric Trapping of Laser-Cooled Atomsh, Precis. Eng. 30 (2006) 387-395. [pdf]

[3] K. Kasuya, K. Nagato, Y. Jin, H. Morii, T. Ooi, and M. Nakao, gRapid and Local Synthesis of Single-Walled Caron Nanotubes by Laser-Assisted Chemical Vapor Depositionh, Jpn. J. Appl. Phys. 46 (2007) L333-L335. [pdf]

[4] Y. Kojima, K. Kasuya, T. Ooi, K. Nagato, K. Takayama, and M. Nakao, gEffects of Oxidation during Synthesis on Structure and Field-Emission Property of Tungsten Oxide Nanowiresh, Jpn. J. Appl. Phys. 46 (2007) 6250-6253. [pdf]

[5] K. Nagato, Y. Kojima, K. Kasuya, H. Moritani, T. Hamaguchi, and M. Nakao, gLocal Synthesis of Tungsten Oxide Nanowires by Current Heating of Designed Micropatterned Wiresh, Appl. Phys. Express, 1 (2008) 014001-1-3. [pdf]

[6] K. Nagato, S. Sugiyama, Yanagida, J. Yanagimoto, gSingle-Pass Severe Plastic Forming of Ultrafine-Grained Plain Carbon Steelh, Mater. Sci. Eng. A, 478 (2008) 376-383. [pdf]

[7] K. Nagato, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, and T. Hamaguchi, gStudy of Gas Cluster Ion Beam Planarization for Discrete Track Magnetic Disksh, IEEE Trans. Magn., 44 (2008) 3476-3479. [pdf]

[8] H. Suzuki, K. Nagato, S. Sugimoto, K. Tsuchiya, T. Hamaguchi, M. Nakao, gIterative imprint for multilayered nanostructures by feeding, vacuum forming and bonding of sheetsh, J. Vac. Sci. Technol. B 26 (2008) 1753-1756. [pdf]

[9] T. Hamaguchi, H. Yonemoto, K. Nagato, K. Tsuchiya, M. Nakao, gSingle-pass forming for three-dimensional microstructures by high-speed shearing of multilayer thin filmsh, J. Vac. Sci. Technol. B 26 (2008) 1771-1774. [pdf]

[10] Y. Kojima, K. Kasuya, K. Nagato, T. Hamaguchi, M. Nakao, gSolid-Phase Growth Mechanism of Tungsten Oxide Nanowires Synthesized on Sputtered Tungsten Filmh, J. Vac. Sci. Technol. B 26 (2008) 1942-1947. [pdf]

[11] K. Nagato, T. Ide, N. Ohno, M. Nakao, T. Hamaguchi, gAutomatic Unbalance Correction of Rotors by Sympathetic Phase Inversion of UV-Curing Resinh, Precision Engineering 33 (2009) 243-247. [pdf]


[12] N. Toyoda, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, I. Yamada, gPlanarization of Amorphous Carbon Films on Patterned Media Using Gas Cluster Ion Beamsh, J. Appl. Phys. 105 (2009) 07C127-1-3. [pdf]

[13] N. Toyoda, T. Hirota, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, I. Yamada, gPlanarization of bit-patterned surface using gas cluster ion beamsh, IEEE Trans. Magn. 45 (2009) 3503-3506. [pdf]

[14] K. Nagato, S. Sugimoto, T. Hamaguchi, M. Nakao, gIterative roller imprint of multilayered nanostructuresh, Microelectron. Eng. 87 (2010) 1543-1545. [pdf]

[15] M. Furubayashi, K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, gField emission properties of discretely synthesized tungsten oxide nanowiresh, Microelectron. Eng. 87 (2010) 1594-1596. [pdf]

[16] S. Hattori, K. Nagato, T. Hamaguchi, M. Nakao, gRapid injection molding of high-aspect-ratio nanostructuresh, Microelectron. Eng. 87 (2010) 1546-1549. [pdf]

[17] K. Nagato, H. Hoshino, H. Naito, T. Hirota, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, T. Hamaguchi, gPlanarization of nonmagnetic films on bit patterned substrates by gas cluster ion beamsh, IEEE Trans. Magn. 46 (2010) 2504-2506. [pdf]

[18] K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, gFabrication of antireflection-structured surface using vertical nanowires as an initial structureh, J. Vac. Sci. Technol. B 28 (2010) L39-L42. [pdf]

[19] K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao, gDirect synthesis of a-Fe2O3 nanowires from sputtered thin filmh, J. Vac. Sci. Technol. B 28 (2010) C6P11-13. [pdf]

[20] K. Nagato, S. Hattori, T. Hamguchi, M. Nakao, "Rapid thermal imprinting of high-aspect-ratio nanostructures by dynamic heating of mold surface", J. Vac. Sci. Technol. B 28 (2010) C6M122-124. [pdf]

[21] K. Nagato, N. Toyoda, H. Naito, H. Tani, Y. Sakane, I. Yamada, M. Nakao, T. Hamaguchi, "Effect of duty ratio of patterned surface on planarization by gas cluster ion beams", J. Appl. Phys. 109 (2011) 07B733-1-3. [pdf]

[22] K. Nagato, H. Hoshino, T. Hamaguchi, M. Nakao, gSlurry mixing device with microchannels for gelcastingh, Microelectron. Eng. 88 (2011) 1814-1816. [pdf]

[23] K. Nagato, S. Inoue, M. Furubayashi, S. Chiashi, S. Maruyama, T. Hamaguchi, M. Nakao, gField emission of vertically aligned single-walled carbon nanotubes patterned by pressing a microstructured moldh, Microelectron. Eng. 88 (2011) 2700-2702. [pdf]

[24] K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao, gPatterning of a-Fe2O3 nanowires by pressing a microstructured mold and their field-emission propertiesh, Microelectron. Eng. 88 (2011) 2697-2699. [pdf]


[25] K. Nagato
, T. Hamaguchi, M. Nakao, gInjection compression molding of high-aspect-ratio nanostructuresh, J. Vac. Sci. Technol. B 29 (2011) 06FG10-1-4.[pdf]


[26] K. Sekiya, K. Nagato, T. Hamaguchi, M. Nakao, gMorphology control of nickel oxide nanowiresh, Microelectron. Eng. 98 (2012) 532-535.
[pdf]


[27] Y. Li, K. Nagato, J.-J.Delaunay, J. Kubota, K. DomengFabrication of highly ordered Ta2O5 and TaN5 nanorod arrays by nanoimprinting and through-mask anodizationh, Nanotechnology 25 (2014) 014013-1-8. [pdf]


[28] K. Nagato, gInjection compression molding of replica molds for nanoimprint lithographyh, Polymers 6 (2014) 604-612.
[pdf]


[29] K. Nagato, K. Takahashi, T. Sato, J. Choi, T. Hamaguchi, M. Nakao, gLaser-assisted replication of large-area nanostructuresh, J. Mater. Process. Technol. 214 (2014) 2444-2449. [pdf]

International conferences

[1] K. Nagato, Ohshige, T. Ooi, K. Tsuchiya, T. Hamaguchi, M. Nakao, gFabrication of Atom Trap Chip for Quantum Information Processingh, 19th American Society for Precision Engineering (ASPE) Annual Meeting, Orland, FL, Oct. 24, 2004. (Oral presentation)

[2] K. Nagato, T. Ooi, T. Kishimoto, H. Hachisu, H. Katori, M. Nakao, gPrototyping of Atomic Conveyer for Quantum Devicesh, 20th American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, Oct. 9-14, 2005, 106-109. (Oral presentation)

[3] K. Kasuya, Y. Jin, K. Nagato, T. Ooi, K. Tsuchiya, T. Hamaguchi, M. Nakao, gPinpoint Synthesis of Carbon Nanotubes using Focused Beamsh, 20th American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, Oct. 9-14, 2005, 476-479. (Poster presentation)

[4] T. Kishimoto, H. Hachisu, J. Fujiki, K. Nagato, M. Yasuda, H. Katori, gElectrodynamic trapping of neutral strontium atomsh, 2005 European Quantum Electronics Conference, EQEC f05, 1467-1468. (IQEC, International Quantum Electronics Conference), Munich, Germany, June 12-17, 2005.

[5] Y. Jin, K. Kasuya, K. Nagato, H. Morii, T. Ooi, M. Nakao, gLocal Synthesis of Single-walled Carbon Nanotubes on Zeolite-covered Silicon Substrate by Laser-heating Chemical Vapor Depositionh, 2nd IEEE-NEMS (Nano- and Micro-Engineered and Molecular Systems), Bangkok, Thailand, Jan. 16-19, 2007, 462-466. (Oral presentation)

[6] Y. Kojima, K. Nagato, K. Kasuya, H. Moritani, M. Nakao, gPinpoint Synthesis of Tungsten Oxide Nanowires using Heat Controlling Layerh, 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 105-108. (Oral presentation)

[7] K. Nagato, H. Hamaguchi, T. Ide, N. Ohno, K. Tsuchiya, M. Nakao, gSelf-Unbalance-Correction Technique for Production of Precision High-Speed Rotorsh, 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 453-456. (Poster presentation)

[8] K. Nagato, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, and T. Hamaguchi, gStudy of Gas Cluster Ion Beam Planarization for Discrete Track Magnetic Disksh, INTERMAG (International Magnetic Conference, IEEE Magnetics Society), Madrid, Spain, May 4-8, 2008, p. 552 (DA-11). (Oral presentation)

[9] M. Nakao, K. Nagato, H. Suzuki, T. Nishino, H. Yonemoto, H. Kaito, T. Hamaguchi and K. Tsuchiya, gSub-wavelength Pitched Cubic Mosaic Multi-layer Precisely Pressed by Nano-features Mold for Multi-functional Optical Elementsh, The 41st CIRP Conference on Manufacturing Systems, The University of Tokyo, Japan, May 26-28, 2008, 449-452. (Oral presentation)

[10] H. Kaito, K. Nagato, K. Kasuya, K. Tsuchiya, H. Hamaguchi, M. Nakao, gLocal Synthesis of Carbon Nanotubes by Electron Beam-Heating Chemical Vapor Depositionh, 23rd American Society for Precision Engineering (ASPE) Annual Meeting, Portland, OR, Oct. 19-24, 2008, pp. 522-525. (Poster presentation)

[11] H. Moritani, K. Nagato, Y. Kojima, M. Furubayashi, K. Kasuya, T. Hamaguchi, M. Nakao, gMulti-sectional Synthesis of Tungsten Oxide Nanowires Using Micropatterned Layer for Field-Emission Displaysh, 23rd American Society for Precision Engineering (ASPE) Annual Meeting, Portland, OR, Oct. 19-24, 2008, pp. 514-517. (Poster presentation)

[12] J. Yanagimoto, K. Nagato, S. Sugiyama, gUltrafine-grained steel by hot extrusionh, International Conference of Technology of Plasticity (ICTP), Kyeongju, Korea, Sep. 7-11, 2008. (Invited presentation)

[13] N. Toyoda, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, I. Yamada, gPlanarization of Amorphous Carbon Films on Patterned Media Using Gas Cluster Ion Beamsh, 53rd Magnetism and Magnetic Materials Conference (MMM 2008), Austin, TX, Nov. 10-14, 2008. (Oral presentation)

[14] N. Toyoda, T. Hirota, K. Nagato, H. Tani, Y. Sakane, T. Hamaguchi, M. Nakao, I. Yamada, gPlanarization of bit patterned surface with gas cluster ion beamsh, INTERMAG (International Magnetic Conference, IEEE Magnetic society), Sacramento, CA, USA, May 4-8, 2009, AC-07. (Oral presentation)

[15] S. Sugimoto, K. Nagato, T. Hamaguchi, M. Nakao, gIterative roller imprint of multilayered nanostructuresh, Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)

[16] M. Furubayashi, K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, gField emission properties of discretely synthesized tungsten oxide nanowiresh, Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)

[17] S. Hattori, K. Nagato, T. Hamaguchi, M. Nakao, gRapid injection molding of high-aspect-ratio nanostructuresh, Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)

[18] H. Hoshino, K. Nagato, H. Naito, T. Hirota, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, T. Hamaguchi, gPlanarization of nonmagnetic films on bit patterned substrates by gas cluster ion beamsh, 11th Joint MMM-Intermag Conference, Washington DC, USA, Jan 18-22, 2010. (Oral presentation)

[19] K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao, gDirect synthesis of vertical a-Fe2O3 nanowires from sputtered Fe thin filmh, The 54th internatinal conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Anchorage, AL, USA, Jun 1-4, 2010. (Poter presentation)

[20] K. Nagato, S. Hattori, T. Hamaguchi, M. Nakao, gRapid thermal imprint of high-aspect-ratio nanostructures with dynamically heating of mold surfaceh,The 54th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Anchorage, AL, USA, Jun 1-4, 2010. (Poster session)

[21] K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao,gDirect synthesis of vertical a-Fe2O3 nanowires from sputtered Fe thin filmh, The 54th internatinal conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Anchorage, AL, USA, Jun 1-4, 2010. (Poter presentation)

[22] K. Nagato, S. Hattori, T. Hamaguchi, M. Nakao,gRapid thermal imprint of high-aspect-ratio nanostructures with dynamically heating of mold surfaceh,The 54th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Anchorage, AL, USA, Jun 1-4, 2010. (Poster presentation)

[23] Hiroaki Hoshino, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao,gSlurry mixing device with microchannels for gelcastingh,The 36th International Conference on Micro & Nano Engineering (MNE), Genova, Italy, Sep 20 (19-22), 2010. (Poster presentation)

[24] Shota Inoue, Keisuke Nagato, Masaki Furubayashi, Shohei Chiashi, Shigeo Maruyama, Tetsuya Hamaguchi, Msayuki Nakao,gField emission of vertically aligned single-walled carbon nanotubes patterned by pressing a microstructured moldh,The 36th International Conference on Micro & Nano Engineering (MNE), Genova, Italy, Sep 20 (19-22), 2010. (Poster presentation)

[25] Masaki Furubayashi, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao,gPatterning of iron oxide nanowires by pressing a microstructured moldh,The 36th International Conference on Micro & Nano Engineering (MNE), Genova, Italy, Sep 20 (19-22), 2010. (Poster presentation)

[26] Atsushi Yamamoto, Jun Suzurikawa, Keisuke Nagato, Tadashi, Tsukada, Aya Tanaka, Tetsuya Hamaguchi, Masayuki Nakao,gBiomolecular-imaging device using light-addressed excitation on a photocatalyst substrateh,The 24 the American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010 (Poster presentation)

[27] Takehiro Mitsuda, Keisuke Nagato, Shuntaro Hattori, Tetsuya Hamaguchi, Masayuki Nakao,gHeat-controlled injection molding of nanostructured optical elementsh,The 24 the American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010 (Poster presentation)

[28] Ryo Nakajima, Keisuke Nagato, Ysuhiro Kawamoto, Hirotoshi Kaito, Masayuki Nakao, Tetsuya Hamaguchi,gFast detection of micro defects using magnetic nondestructive testing methodshThe 24 the American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010 (Poster presentation)

[29] Makoto Shimoda, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao,gPenetration of residual layer in nanoimprint lithography by direct oxidation of photocatalytic filmshThe 24 the American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010 (Poster presentation)

[30] K. Nagato, N. Toyoda, H. Naito, H. Tani, Y. Sakane, I. Yamada, M. Nakao, T. Hamaguchi,"Effect of duty ratio of patterned surface on planarization by gas cluster ion beams,Magnetism and Magnetic Materials (MMM), Atlanta, Nov 17(14-18), 2010(Poster presentation)

[31] K. Nagato, T. Hamaguchi, M. Nakao,gInjection compression molding of high-aspect-ratio nanostructuresh,The 55th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), P13-27, Las Vegas, NV, USA, 1 Jun (31May-3Jun), 2011. (Poster presentation)

[32] K. Nagato, T. Hamaguchi, M. Nakao,gCopper oxide nanowire arrays synthesized from sputtered Cu thin filmhThe 55th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), P13-19, Las Vegas, NV, USA, 1 Jun (31May-3Jun), 2011. (Poster presentation)

[33] Toshimi Sato, Keisuke Nagato, Junho Choi, Tetsuya Hamaguchi, Masayuki Nakao,gLaser-Assisted Imprinting of Nanostructured Glassh,2011 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1-4, Aug 15-18, 2011, Portland, Oregon, USA. (Invited, oral presentation)

[34] Daisuke Suehiro, Keisuke Nagato, Tetsuya Hamaguchi, M. Nakao,gFabrication of antireflection structure by simple annealing of Fe filmh,2011 11th IEEE International Conference on Nanotechnology (IEEE NANO), 588-591, Aug 15-18, 2011, Portland, Oregon, USA. (Poster presentation)

[35] Yuu Uriya, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao,gReductive-Gas Sensor using Iron Oxide Nanowiresh,2011 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1465-1468, Aug 15-18, 2011, Portland, Oregon, USA. (Oral presentation)

[36] Shota Ikeshima, Keisuke Nagato, Kazuyasu Sugiyama, Shu Takagi, Tetsuya Hamaguchi, Masayuki Nakao,gNanoparticle Control of Slurry Flow in Microchannelh,2011 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1728-1732, Aug 15-18, 2011, Portland, Oregon, USA. (Poster presentation) --> Excellent paper award

[37] Shu Wakabayashi, Yasuhiro Kawamoto, Keisuke Nagato, Shinichi Mutou, Masayuki Nakao, Tetsuya Hamaguchi, gInvestigation of excavation behavior with model experiment and distinct element method (DEM) simulation using irregularly shaped particlesh, Proceedings of the 17th International Conference of the International Society for Terrain-Vehicle Systems (ISTVS), Sep. 18-22 (22), 2011, Blacksburg, VA, USA. (Oral presentation)

[38] Kaname Sekiya, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, gMorphology control of nickel oxide nanowiresh, Digest of 37th International Conference on Micro and Nano Engineering (MNE), 19-23 (22) Sep. 2011, Berlin, Germany. (Poster presentation)

[39] Toshimi Sato, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, gLaser-scanning imprinting for large-area nanostructuresh, Digest of 37th International Conference on Micro and Nano Engineering (MNE), 19-23 (22) Sep. 2011, Berlin, Germany. (Poster presentation) --> Won the best poster award.

[40] M. Shimoda, K. Nagato, T. Hamaguchi, M. Nakao, gPhotolithography with periodic multilayered resist film for photonic crystalsh, Digest of the 24th International Microprocess and Nanotechnology Conference (MNC), 26P-7-74, 24-27 (26) Oct. 2011, Kyoto, Japan (Poster presentation)

[41] K. Nagato, R. Nakajima, Y. Kawamoto, Y. Ohta, H. Shichino, M. Nakao, T. Hamaguchi, gInvestigation of boundary lubricating films developing on gear material under high-pressure twin disk testh, Digest of International Tribology Conference (ITC), P06-01, 30 Oct -3 Nov (2 Nov), 2011, Hiroshima, Japan (Poster presentation)

[42] K. Nagato, T. Sato, T. Hamaguchi, M. Nakao, gEffect of offset temperature on replication of laser-assisted imprintingh, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2011. (Poster presentation)

[43] K. Nagato, T. Hamaguchi, M. Nakao, gInjection compression molding of replica molds for nanoimprint lithographyh, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2011. (Poster presentation)

[44] T. Sato, K. Nagato, J. Choi, T. Hamaguchi, M. Nakao, gLaser-scanning imprinting for large-area nanostructuresh, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2011. (Invited Poster)

[45] Remnev Alexey, Shalnov Konstantin, Uemura Kensuke, Keisuke Nagato, gEfffect of Plasma Properties and Set-Up Geometry on Medical Needles Finishing with Ion Plasma Sputtering Methodh, 4th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials (ISPlasma2012), Chuo University, 4-8 March 2012.

[46] Keisuke Nagato, Daisuke Suehiro, Toshimi Sato, Shota Ikeshima, Yasuaki Watanabe, Masayuki Nakao, gRoller Replication of Nano-/Microstructures of Polymers, Glasses, Metals, and Ceramicsh, The 3rd International Conference on Nanomanufacturing (nanoMan2012), 25-27(26) July 2012, Saitama, Japan (Oral presentation)  a Won Excellent Young Researcher Award

[47] Yasuyuki Watanabe, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, gImprovement of heat transfer coefficient of boiling surface on nanostructured metal using nanoimprintingh, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 24(21-26), 2012, 46-49 (Oral presentation)

[48] Shota Ikeshima, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, gOrienattion control of anisotropic particle by shear forceh, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 316-319 (Poster presentation)

[49] Takuma Yamauchi, Keisuke Nagato, Shota Ikeshima, Tetsuya Hamaguchi, Masayuki Nakao, gMicromixer of multi-material slurry with rotation-split-combination cycle for ceramic componentsh, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 359-362 (Poster presentation)

[50] Shunta Shinagawa, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, gEnhancement of power efficiency of solid oxide fuel cells by aligninh microstructure path of ion/electron/gas in anodeh, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 343-346 (Poster presentation)

[51] Keisuke Nagato, Ryunosuke Fujisawa, Daisuke Suehiro, M. Kikuta, Tetsuya Hamaguchi, Masayuki Nakao, gAntireflection structure fabricated by changing Fe2O3 nanowires to Fe3O4 nanoconesh, Digest of 38th International Conference on Micro and Nano Engineering (MNE), 16-20 Sep. 2012, Toulouse, France. (Oral presentation)

[52] Keisuke Nagato, Ryota Nakabayashi, Tetsuya Hamaguchi, Masayuki Nakao, gHigh-speed shearing of multilayered light-waveguideh, Digest of 38th International Conference on Micro and Nano Engineering (MNE), 16-20 Sep. 2012, Toulouse, France. (Poster presentation)

[53]Omar Alghurair, Alexey Remnev, Keisuke Nagato, Shota Ikeshima, Yasunori Ono, Kensuke Uemura, Masayuki Nakao, gInvestigation of Insertion Phenomena with Needles Treated by Plasma Etchingh, The First CIRP Conference on Bio manufacturing, 4-6 Mar. 2013, The University of Tokyo, Tokyo. (Oral presentation) (In: Procedia CIRP 5 (2013) 53-56)

[54] Keisuke Nagato, Naoki Shikazono, Andre Weber, Dino Klotz, Masayuki Nakao, and Ellen Ivers-Tiffee, gSOFC Anode Fabricated by Magnetically Aligning of Ni Particlesh, ECS Transasctions, 57 (2013) 1307-1311. SOFC Symposium, 7-11 (9, OA-31) Oct. 2013. (Oral presentation)

[55] Ken Takahashi, Keisuke Nagato, Toshimi Sato, Daisuke Suehiro, Tetsuya Hamaguchi, Masayuki Nakao, gLaser-assisted roller imprinting of nanostructures with real-time monitoring of replication degreeh, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25 Oct 2013, St. Paul, Minnesota, USA (poster presentation).

[56] Takuma Yamauchi, Shota Ikeshima, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, gContinuous and fast manufacturing technique of ion-conducting ceramic compacts with oriented anisotropic particleh, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25 Oct 2013, St. Paul, Minnesota, USA (poster presentation).

[57] Shunta Shinagawa, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, gOrientation-controlled microfabrication of anode of solid oxide fuel cellsh, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25 Oct 2013, St. Paul, Minnesota, USA (poster presentation).

[58]
S. Iwasaki, K. Nagato, L. Wang, Y. Li, J.-J. Delaunay, and M. Nakao, gMorphology Control of Anodic Porous Alumina Using Nanoimprintingh, Digest of the 58th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Washington DC, USA, May 28 (May27-30), 2014. (poster presentation)

[59] S. Miyazaki, K. Nagato, Y. Watanabe, K. Takahashi, N. Shikazono, and M. Nakao, gHigh-Heat-Transfer Boiling Surface with Micropattern Replicated by Nanoimprintingh, Digest of the 58th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Washington DC, USA, May 28 (May27-30), 2014. (poster presentation)

[60] K. Takahashi, K Nagato, J. Wang, T. Hamaguchi, and M. Nakao, gHigh-Speed and Low-Energy-Consumption Replication of Nanostructures with Laser-Assisted Roller Nanoimprintingh, Digest of the 58th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Washington DC, USA, May 30 (May27-30), 2014. (Oral presentation)

[61]
K. Nagato, N. Shikazono, M. Nakao, J. Hayd, D. Klotz, E. Ivers-Tiffee, gParameter Identification on Polarization on Polarization Resistance of SOFC Anode with Magnetically Aligned Nih, 11th European SOFC & SOE Forum, Lucerne, Switzerland 2 (1-4) July 2014. (Oral presentation)

[62] K. Nagato, K. Mitamura, S. Shinagawa, and M. Nakao, gReal-Time Observation of Paste during Mico-Via Filling in Screen Printingh, The 5th International Conference on Nanomanufacturing (nanoMan2014), Bremen, Germany, 8 (8-10) July 2014. (Keynote)

[63] K. Shintani, K. Nagato, R. Fukui, M. Nakao, K. Kusaka, gAdhesively-Bonded Joint for Aluminum pipe Frame Structures and Mechanical Propertiesh, 5th World Congress on Adhesion and Related Phenomena (WCARP-V), p.37, Nara, Japan, 8 (7-11) Sep 2014. (Oral presentation)

[64] K. Takahashi, K. Nagato, T. Hamaguchi, M. Nakao, gHigh-Speed Replication of Light-Extraction Structure with Thermal Roller Nanoimprintingh, 40th Micro and Nano Engineering (MNE) 2014, Lausanne, Switzerland, Sep 22-26 2014. (poster presentation)

[65] J. Wang, K. Nagato, K. Takahashi, T. Hamaguchi, M. Nakao, gNovel Patterning of Metal Trace on Flexible Substrate by Nanoimprinting and Screen Printingh, 40th Micro and Nano Engineering (MNE) 2014, Lausanne, Switzerland, Sep 22-26 2014. (poster presentation)

[66]
L. Wang, K. Nagato, S. Iwasaki, T. Hamaguchi, M. Nakao, gThrough-hole membrane with anodic-alumina nanohole arrayh, 40th Micro and Nano Engineering (MNE) 2014, Lausanne, Switzerland, Sep 22-26 2014. (poster presentation)

[67] K. Nagato, K. Takahashi, M. Nakao, gThermal Roller Nanoimprinting -Multilayered Structures, Laser-Assisted Replication-h, 14th International Conference on Nanoimprint and Nanoprint Technology (NNT 2014), Oct 22-24(23), 2014, ANA Crowne Plaza Kyoto, Kyoto, Japan. (Oral presentation)

<--Top page